Combin
ation |
Question Number |
Show/
Tell me |
Question |
Answer |
| 1 |
B08 |
show |
Show me how you would
check that the direction indicators are working. |
Applying the
indicators or hazard warning switch and check
functioning of all indicators. (may need to switch
ignition on, prompt not to start engine) |
| 1 |
B10 |
Tell |
Tell me how you would check that the
brakes are working before starting a journey. |
Brakes should not
feel spongy or slack. Brakes should be tested as you
set off. Vehicle should not pull to one side. |
| 2 |
B05 |
Tell |
Identify where the
windscreen washer reservoir is and tell me how you
would check the windscreen washer level. |
Identify reservoir
and explain how to check level. |
| 2 |
B09 |
Show |
Show me how you would check that the
brake lights are working on this car. (I can assist
you, if you need to switch the ignition on, please
don't start the engine) |
Operate brake pedal, make use of
reflections in windows, garage doors, etc, or ask
someone to help. (may need to switch ignition on,
prompt not to start engine) |
| 3 |
B02 |
Show |
Show me / explain how you would
check that the power assisted steering is working
before starting a journey. |
If the steering becomes heavy the
system may not be working properly. Before starting
a journey two simple checks can be made. Gentle
pressure on the steering wheel, maintained while the
engine is started, should result in a slight but
noticeable movement as the system begins to operate.
Alternatively turning the steering wheel just after
moving off will give an immediate indication that
the power assistance is functioning. |
| 3 |
B12 |
Tell |
Tell me where you would find the
information for the recommended tyre pressures for
this car and how tyre pressures should be checked. |
Manufacturer’s guide, use a reliable
pressure gauge, check and adjust pressures when
tyres are cold, don’t forget spare tyre, remember to
refit valve caps. |
| 4 |
B04 |
Show |
Show me how you would check the
parking brake (handbrake) for excessive wear, make
sure you keep safe control of the vehicle |
Apply footbrake firmly. Demonstrate
by applying parking brake (handbrake) so that when
it is fully applied it secures itself, and is not at
the end of the working travel. |
| 4 |
B05 |
Tell |
Identify where the windscreen washer
reservoir is and tell me how you would check the
windscreen washer level. |
Identify
reservoir and explain how to check level |
| 5 |
B01 |
Show |
Open the bonnet, identify where you
would check the engine oil level and tell me how you
would check that the engine has sufficient oil. |
Identify dipstick / oil level
indicator, describe check of oil level against the
minimum / maximum markers. |
| 5 |
B12 |
Tell |
Tell me where you would find the
information for the recommended tyre pressures for
this car and how tyre pressures should be checked.
|
Manufacturer’s guide, use a reliable pressure gauge,
check and adjust pressures when tyres are cold,
don’t forget spare tyre, remember to refit valve
caps. |
| 6 |
B03 |
Show |
Open the bonnet, identify where you
would check the engine coolant level and tell me how
you would check that the engine has the correct
level. |
Identify high/low level markings on
header tank where fitted or radiator filler cap, and
describe how to top up to correct level. |
| 6 |
B18 |
Tell |
Tell me how you make
sure your head restraint is correctly adjusted so it
provides the best protection in the event of a crash |
The head restraint
should be adjusted so the rigid part of the head
restraint is at least as high as the eye or top of
the ears, and as close to the back of the head as is
comfortable. N.B. Some restraints might not be
adjustable |
| 7 |
B07 |
Show |
Open the bonnet,
identify where the brake fluid reservoir is and tell
me how you would check that you have a safe level of
hydraulic brake fluid. |
Identify reservoir, check level against high/low
markings. |
| 7 |
B13 |
Tell |
Tell me how you would
check the tyres to ensure that they have sufficient
tread depth and that their general condition is safe
to use on the road. |
No cuts
and bulges, 1.6mm of tread depth across the central
¾ of the breadth of the tyre and around the entire
outer circumference |
| 8 |
B06 |
Show |
Show me how you would
check that the horn is working (off road only). |
Check
is carried out by using control (turn on ignition if
necessary |
| 8 |
B13 |
Tell |
Tell me how you would
check the tyres to ensure that they have sufficient
tread depth and that their general condition is safe
to use on the road. |
No cuts
and bulges, 1.6mm of tread depth across the central
¾ of the breadth of the tyre and around the entire
outer circumference. |
| 9 |
B10 |
Tell |
Tell me how you would
check that the brakes are working before starting a
journey. |
Brakes
should not feel spongy or slack. Brakes should be
tested as you set off. Vehicle should not pull to
one side |
| 9 |
B14 |
Show |
Show me how you would
clean the windscreen using the windscreen washer and
wipers |
Operate
control to wash and wipe windscreen (turn ignition
on if necessary) |
| 10 |
B11 |
Tell |
Tell me how you would
check that the headlights & tail lights are working.
(No need to exit vehicle) |
Explanation: Operate switch (turn on ignition if
necessary), then walk round vehicle. (As this is a
"Tell Me" question, there is no need to physically
check the lights.) |
| 10 |
B15 |
Show |
Show me how you would
set the demister controls to clear all the windows
effectively, this should include both front and rear
screens |
Set all
relevant controls including; fan, temperature, air
direction / source and heated screen to clear
windscreen and windows. Engine does not have to be
started for this demonstration |
| 11 |
B16 |
Show |
Show me how you would
switch on the rear fog light(s) and explain when you
would use it/them. |
(No
need to exit vehicle) Operate switch (turn on dipped
headlights and ignition if necessary). Check warning
light is on. Explain use |
| 11 |
B19 |
Tell |
Tell me how you would
know if there was a problem with your anti lock
braking system. |
Warning
light should illuminate if there is a fault with the
anti lock braking system. |
| 12 |
B09 |
Show |
Show me how you would
check that the brake lights are working on this car.
(I can assist you, if you need to switch the
ignition on, please don't start the engine) |
Operate
brake pedal, make use of reflections in windows,
garage doors, etc, or ask someone to help. (may need
to switch ignition on, prompt not to start engine) |
| 12 |
B11 |
Tell |
Tell me how you would
check that the headlights & ail lights are working.
(No need to exit vehicle) |
Explanation: Operate switch (turn on ignition if
necessary), then walk round vehicle. (As this is a
"Tell Me" question, there is no need to physically
check the lights.) |
| 13 |
B17 |
Show |
Show me how you
switch your headlight from ipped to main beam and
explain how you would know the main beam is on
whilst inside the car |
Operate
switch (with ignition or engine on if necessary),
check with main beam warning light |